6-Component Force /Torgue Transducer
3-Component Force /Torgue Transducer
Mini-Force /Torgue Transducer
Contact info

Add:Floor 2,Building 4,Center of Investment No.669,

Changjiang WestRoad Hefei Anhui,China             

Postcode: 230031
Tel: +86-551-7122236  


Email: info@biomechanicsweb.com

3-Component Force /Torgue Transducer

 Tri-axial Transducer-Smart300-1000


The Smart300-1000 model Biomechanics Tri-axial Transducer can be used for biomechanics, engineering, medical research, orthopedics, rehabilitation evaluation, prosthetics, and general industrial uses. Specific uses include gait analysis, “Romberg” testing or stability analysis, neurological analysis, prosthetics fitting, athletic performance, shoe design, and force, power, and work studies.



The JUNE Biomechanics Tri-axial Transducer model Smart300-1000 was specifically designed for the precise measurement of applied forces. The transducer measures the three orthogonal force components along the X, Y, and Z axes, and produces a total of three outputs. The high sensitivity, low crosstalk, excellent repeatability and long term stability of this transducer makes it ideal for research and clinical studies. The Smart300-1000 is easy to use and is available in 100 Newton vertical capacity.



The Smart300-1000 model Biomechanics Tri-axial Transducer uses strain gages mounted on ring structure to measure forces. As with most conventional strain gage transducers, bridge excitation and signal amplification are required. JUNE’s amplifier is high gain devices which provide excitation and amplification for multiple channels in one convenient package. The amplifier provides the six channels of amplification required by two Tri-axial Transducers. These amplifiers process the transducer signals and provide outputs suitable for an A/D converter so that the data can be stored and processed by a computer.



Each platform is inspected and tested in JUNE’s calibration facility. The calibration procedure provides a detailed sensitivity matrix and a complete test of all system components, including the amplifier and the connecting cable if ordered together.



Automated data collection and reduction requires a computer and software. JUNE-Analysis, JUNE’s software package, is specifically designed for biomechanics applications. It provides quick and easy hardware setup and automated data acquisition and analysis. JUNE-Analysis allows the user to quickly begin testing rather than take on the tedious and lengthy process of writing data acquisition and reduction routines. The JUNE-Analysis software package is available separately or combined in one of JUNE’s Bioforcen Systems.



Systems are complete gait and balance analysis tri-axial transducers systems. Each system consists of tri-axial transducers, amplifiers, cables, mounting hardware, A/D converter, and JUNE-Analysis analysis software, all sold at a special system price.



JUNE also offers special multi-axis transducers to meet your specific needs. Units are available in waterproof versions and various sizes, load capacities, sensitivities, and materials. The transducer with capacities as high as 2,000 Newtons have been made. Contact JUNE for any custom requirements

 Specification / 規格卡



l   Fx, Fy Capacity (N): 500 N

l   Fz Capacity (N): 1000N

l   Fx, Fy Sensitivity (µV/[V*N]): 2.7

l   Fz Sensitivity (µV/[V*N]):1.2



l   Safe Temperature Range: 050OC

l   Compensated humidity Range: 2070%RH

l   Safe Excitation Voltage: 12V DC

l   Weight: ≤10g

l   Crosstalk: Less than 2% on all channels

l   Sensitivity Change with Temperature:≤1%/°C

l   Fx, Fy, Fz hysteresis: ≤ 1% Full Scale Output

l   Fx, Fy, Fz non-linearity: ≤ 1% Full Scale Output

l   Size: 11.1 * Ø18 mm

l Over loading: : 150 % Full Scale Output